Under Cabinet Lights with Motion Sensor and Remote Control

These under cabinet lighting feature a built-in 3200mAh battery that can be easily recharged via the included USB cable. When fully charged, the wireless under cabinet lighting can provide up to 10-11 hours of continuous 100% brightness in Always-On mode. In AUTO mode, the lights can last for 30-90 days with an illumination frequency of 10-20 times daily for 20 seconds each, making them an energy-saving solution. 💡💡💡 Tip: Please charge the lights before first use.

The motion sensor lights will turn on when movement is detected within a 10ft / 120° range. In [Day Mode], the under cabinet lights will activate whenever motion is sensed, while [Night Mode] will only turn on the under counter lights in dark environments. If no movement is detected after 20 seconds of activation, the closet lights will automatically turn off to conserve energy.

Convenience is enhanced with the included remote control, which allows you to easily switch between ON, AUTO (day/night sensing), and OFF modes. The remote also features a dimming function activated by the "+/-" buttons, giving you full control over the lighting level. Additionally, the closet light has a timer function with options for automatic shutdown after 5, 15, 30, 45, or 60 minutes, making it suitable for both home and commercial use to enhance comfort and convenience.

Installation is effortless, as the under cabinet lighting is equipped with a built-in strong magnet that can be directly attached to iron products. Alternatively, you can use the provided iron sheet with a 3M adhesive strip to fix the lights anywhere, ensuring a secure and long-lasting hold.

We offer a lifetime warranty for these cabinet lights, giving you the peace of mind to contact us whenever you need assistance. The lights are made of high-quality anodized aluminum, making them suitable for use in a variety of locations, including your closet, wardrobe, cabinet, garage, storage room, basement, or any other dark corner of your house.

⚠NOTE⚠ - Precautions for using 3M adhesive: 1. Please clean the surface to remove any stains, water stains, oil stains, or dust before applying the adhesive. 2. Avoid repeated use of the tape and ensure the adhesive is pressed for more than 5 seconds. 3. Do not paste the tape directly on concave, convex, rough surfaces, or on the human body. 4. The tape should be used and stored in a cool place, away from direct sunlight.

product information: